Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Versatile and Homogeneous DNA Tetraplex Platform for Constructing Label-Free Logic Devices: From Design to Application

The design of DNA-based logic circuits has become an active research field in DNA nanotechnology and holds great potential in intelligent bioanalysis. To date, although many DNA-based logic systems have been realized, the implementation of advanced logic functions is still challenging, especially with simple and homogeneous compositions. Herein, by integrating two DNA tetraplex structures (G-quadruplex and i-motif), a completely label-free logic platform with high scalability was established, with which a series of advanced functions were realized, including arithmetic (adders and subtractors) and nonarithmetic ones (majority and dual-transfer gates). Furthermore, the platform was also applied as an intelligent biosensor to coanalyze two cancer-related micro-RNAs with high sensitivities and specificities. Considering the excellent versatility, expandability, and biocompatibility, the platform may promote the development of DNA computing and hold great potential in multiparameter sensing and medical diagnosis.     

Effect of Zr concentration on the mechanical and thermodynamic properties of NbIr3 intermetallic compounds from theoretical estimations

ABSTRACT

The iridium is an important metal which has excellent resistance to corrosion at high temperature. L1₂ intermetallic compounds i.e. Ir₃Nb and Ir₃Zr, with similar lattice parameters are ideal for working at high temperature. They are fully soluble due to their low lattice misfit. A first-principle investigation into the effect of doping Zr with different concentrations on the electronic structure, mechanical and thermodynamic properties of NbIr₃ has been studied to prompt the development of novel high-temperature materials. Nine Zr_xNb_8?xIr₂₄ compounds are carefully considered. The results show that adding Zr into these compounds can strengthen their structural stability and ductility. Nevertheless, it reduces the elastic modulus and elastic stiffness. Simultaneously, with the increase of Zr content, the thermodynamic properties of these compounds decrease. It is also found that the changes of elastic modulus are mainly attributed to the variations of bonds in these compounds.     

The High Energy X-ray telescope (HE) onboard the Insight-HXMT astronomy satellite

The Insight-Hard X-ray Modulation Telescope(Insight-HXMT) is a broadband X-ray and γ-ray(1-3000 ke V) astronomy satellite. One of its three main telescopes is the High Energy X-ray telescope(HE). The main detector plane of HE comprises 18 Na I(Tl)/Cs I(Na) phoswich detectors, where Na I(Tl) is used as the primary detector to measure ~ 20-250 ke V photons incident from the field of view(FOV) defined by collimators, and Cs I(Na) is used as the active shielding detector to Na I(Tl) by pulse shape discrimination. Additionally, Cs I(Na) is used as an omnidirectional γ-ray monitor. The HE collimators have a diverse FOV,i.e. 1.1°×5.7°(15 units), 5.7°×5.7°(2 units), and blocked(1 unit). Therefore, the combined FOV of HE is approximately5.7°×5.7°. Each HE detector has a diameter of 190 mm resulting in a total geometrical area of approximately 5100 cm2, and the energy resolution is ~15% at 60 ke V. For each recorded X-ray event by HE, the timing accuracy is less than 10 μs and the deadtime is less than 10 μs. HE is used for observing spectra and temporal variability of X-ray sources in the 20-250 ke V band either by pointing observations for known sources or scanning observations to unveil new sources. Additionally, HE is used for monitoring the γ-ray burst in 0.2-3 Me V band. This paper not only presents the design and performance of HE instruments but also reports results of the on-ground calibration experiments.     

DFT mechanistic study of the H2‐assisted chain transfer copolymerization of propylene and p‐methylstyrene catalyzed by zirconocene complex

DFT computations have been performed to investigate the mechanism of H₂‐assisted chain transfer strategy to functionalize polypropylene via Zr‐catalyzed copolymerization of propylene and p‐methylstyrene (pMS). The study unveils the following: (i) propylene prefers 1,2‐insertion over 2,1‐insertion both kinetically and thermodynamically, explaining the observed 1,2‐insertion regioselectivity for propylene insertion. (ii) The 2,1‐inserion of pMS is kinetically less favorable but thermodynamically more favorable than 1,2‐insertion. The observation of 2,1‐insertion pMS at the end of polymer chain is due to thermodynamic control and that the barrier difference between the two insertion modes become smaller as the chain length becomes longer. (iii) The pMS insertion results in much higher barriers for subsequent either propylene or pMS insertion, which causes deactivation of the catalytic system. (iv) Small H₂ can react with the deactivated [Zr]?pMS?PP_n facilely, which displace functionalized pMS?PP_n chain and regenerate [Zr]? H active catalyst to continue copolymerization. The effects of counterions are also discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 576–585     

Carbon nanotube-carbon black hybrid counter electrodes for dye-sensitized solar cells and the effect on charge transfer kinetics

In this work, the catalytic activity of carbon nanotubes (CNTs), carbon black (CB), and CNT-CB counter electrodes in the I⁻/I₃⁻ reduction reaction is reported and compared with the Pt counter electrode. The fabricated counter electrodes were evaluated in dye-sensitized solar cells (DSSCs). The results indicate that the best cathodes were made from CNT₁₀ (240 μm) and CB with a charge transfer resistance (R_CT) of 2.70 Ω, and when the complete device shows 19.83 Ω of internal series resistance (R_S), the photovoltaic parameters of these cells were J_SC = 10.47 mA cm⁻²; V_OC = 0.70 V; and FF = 57.90, with an efficiency of 4.29%, indicating a better interaction between the CNT₁₀ in the 3D network of the counter electrode, generating a good charge transfer kinetics, in comparison with only CNT₁₀ or CB.

     

Bipolar Electrochemistry Exfoliation of Layered Metal Chalcogenides Sb2S3 and Bi2S3 and their Hydrogen Evolution Applications

Efficient exfoliation and downsizing of Sb₂S₃ and Bi₂S₃ layered compounds by using scalable bipolar electrochemistry on their suspensions in aqueous media are here demonstrated. The resulting samples were characterized in detail by transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy; their electrochemistry toward hydrogen evolution was also investigated. Hydrogen evolution ability of exfoliated Sb₂S₃ and Bi₂S₃ was investigated and compared to the bulk counterparts.     

Pyridinium-functionalized metalloporphyrins as bifunctional catalysts for cycloaddition of epoxides and carbon dioxide

New pyridinium-functionalized metalloporphyrins MEtPpBr₄ (M = Zn²⁺, Co²⁺, Ni²⁺, Cu²⁺; EtPp = 5, 10, 15, 20-tetra(4-(3-(N-ethyl-4-pyridyl)pyrazolyl)phenyl)porphyrin) were synthesized as bifunctional catalysts for the cycloaddition reactions of epoxides and CO₂. The effects of catalyst loading, CO₂ pressure, reaction temperature and time on catalytic activity were investigated. ZnEtPpBr₄ ( 1 ) and CoEtPpBr₄ ( 2 ) exhibited efficient activities in the cycloaddition reactions of various epoxides with CO₂ as at 120 °C under 2 MPa of CO₂ pressure without solvent. Most of corresponding cyclic carbonates could be obtained in almost quantitative yields and > 99.9% selectivity with molar ratio of epoxide/catalyst 2222 after 8 hr of reaction.